| TECHNICAL SPECIFICATIONS | STH 1100M |
|---|
| Maximum table stroke | 1800 mm |
| Table surface | 1600x350 mm |
| Surface to be ground | 1960x500 mm |
| Minimum distance from wheel to table | 0 mm |
| Maximum distance from wheel to table | 800 mm |
| Surface milling head diameter | 420 mm |
| Distance between column and wheel center | 410 mm |
| Table automatic movement speeds | 0÷1500 mm/1ʹ
|
| Table fast movement speed | 1500 mm/1' |
|
| Wheel rotation speeds | 0÷1400 rpm |
| Wheel head motor power | 5,5 kw AC motor |
| Wheel head fast movements motor power | 0,75 kw servo motor |
| Table movement motor power | 0,75 kw AC motor |
| Table movement by ball screw system |
|
| Wheel head movement by ball screw system |
|
| ---------- | --------- |
| ---------- | --------- |
| ---------- | --------- |
| ---------- | --------- |
| ---------- | --------- |
| ---------- | --------- |
| ---------- | --------- |
| ---------- | --------- |
| ---------- | --------- |
| ---------- | --------- |
| CODE | STANDARD EQUIPMENTS | ADET / QUANTITY |
|---|
| STD 1217 | PLC system for servo motor | 1 |
| STD 1218 | Z axis servo motor | 1 |
| STD 1219 | Z axis handwheel encoder | 1 |
| STD 1220 | CBN and PCD milling head with cutting bits (Ø9.52 mm 1 pcs CBN 1 pcs PCD) Milling capacity Ø 420 mm | 1 |
| STD 1221 | Pair of parallel supports (130x580 mm) | 2 |
| STD 1222 | Workpiece clamping plates | 4 |
| STD 1223 | Universal setting up fixture for “V” blocks (Single spindle) | 1 |
| STD 1224 | Automatic device for machine stop after cutting | 1 |
| STD 1225 | Surface straightness checking device | 1 |
| STD 1226 | Set of service tools | 1 set |
| STD 1227 | Spot light | 1 |
| STD 1228 | Balancing nuts and rubbers | 8 |
| STD 1229 | Operating manual | 1 |
|
| ------- | ---------- | 1 |
| ------- | ---------- | 1 |
| ------- | ---------- | 1 |
| ------- | ---------- | 1 |
| ------- | ---------- | 1 |
| ------- | ---------- | 1 |
| ------- | ---------- | 1 |
| ------- | ---------- | 1 |
| ------- | ---------- | 1 |
| ------- | ---------- | 1 |
| ------- | ---------- | 1 |
| ------- | ---------- | 1 |
| ------- | ---------- | 1 |
| ------- | ---------- | 1 |
| CODE | OPTIONAL EQUIPMENTS |
|---|
| SR 1170 | Segmental wheel Ø 400 mm | 1 |
| SR 1171 | Grinding wheel (100x65x58x25) | 10 |
| SR 1172 | Surface milling plate | 1 |
| SR 1173 | Ø 16x60 mm surface milling cartridge | 1 |
| SR 1174 | Cutting bit for surface milling cartridge | 1 |
|
| SR 1175 | Grinding wheel dresser | 1 |
| SR 1176 | Grinding balancing shaft | 1 |
| SR 1177 | Grinding wheel extractor | 1 |
| SR 1178 | Static balancing stand for grinding wheel | 1 set |
| SR 1179 | Universal setting-up fixture for “V” blocks complete with 30°-45° reference square | 1 |
| SR 1180 | Universal clamping support for “V” heads (Table surface 100x300 mm lenght 800 mm) | 1 |
| SR 1181 | Universal setting-up fixture for “V” heads (Table surface 100x450 mm lenght 1200 mm) | 1 |
| SR 1182 | Motor drive rotation table (Ø 320 mm | 1 |
| SR 1183 | CBN and PCD milling head with cutting bits (Ø9.52 mm 1 pcs CBN 1 pcs PCD) Milling capacity Ø 420 mm | 1 |
| SR 1184 | CBN & PCD cartridge | 1 |
| SR 1185 | Ø 9.52 mm CBN cutting bit (for cast iron) | 1 |
| SR 1186 | Ø 9.52 mm PCD cutting bit (for aluminum) | 1 |
| SR 1187 | Coolant system | 1 |
| SR 1188 | Spot light | 1 |
| ---------- | ---------- | — |
| ---------- | ---------- | — |
| ---------- | ---------- | — |
| ---------- | ---------- | — |
| ---------- | ---------- | — |
| ---------- | ---------- | — |
| DIMENSIONS |
|---|
| Length | 3150 mm |
| Height | 2360 mm |
| Width | 1700 mm |
|
| DIMENSIONS WITH PACKING |
|---|
| Length | 3350 mm |
| Height | 2580 mm |
| Width | 1820 mm |
|
| WEIGHTS |
|---|
| Without packing | 3400 kg |
| With packing | 3650 kg |